Maestro Invader Distortion Effects Pedal - 1
Skip Navigation Website Accessibility

1200 East Putnam Ave
Riverside CT, 06878
(203) 637-1119 (call or text)

 


Maestro Invader Distortion Effects Pedal

The Maestro Invader Distortion is a high-gain, all-analog modern distortion pedal with a heavy, aggressive, dominant sonic character and loads of rich harmonics. With the Maestro Invader Distortion, users can generate a wide range of distorted sounds. The 3-knob control layout gives users intuitive control over Gain (distortion amount), tone and output level, with more than enough volume on tap to easily exceed unity gain when you want to. Users can also engage a built-in noise gate with the top panel toggle switch. An internal trim pot mounted on the circuit board inside the pedal allows the user to adjust the level of the noise gate’s threshold. The true bypass footswitch triggers the LED lights in the bugles in the Maestro logo when it’s on, so you’ll always know when the effect is active.

Invader Distortion Effects Pedal Specifications:

  • Controls: Gain, Tone, Level; internal Noise Gate Threshold trim pot
  • Switches: True Bypass footswitch, Gate On/Gate Off toggle switch
  • LED Indicators: Red, yellow, and blue bugles in the Maestro logo illuminate when the pedal is active
  • Signal Processing: All-Analog
  • Power Requirements: 9V battery or regulated 9-12*VDC power supply (5.5 x 2.1mm plug, wired
  • center-negative) *Running the pedal at 12V provides increased headroom
  • Current Draw: 35 mA
  • Power On Switch: Incorporated into the input jack. Unplug the input when not in use to prevent battery drain. Remove the battery when the pedal is going to be stored for long periods to prevent leakage and damage.
  • Input Impedance: 100K ohms
  • Output Impedance: 100 ohms
  • Switching: True Bypass
  • Dimensions (D x W x H): 5.04” x 3.45” x 2.5”, including feet, knobs, jacks, etc

HOURS

  • Mon/Wed 11:30 - 5:30
  • Tues/Thurs 11:30-6:30
  • Fri 12 - 5
  • Sat 10 - 3
  • Sun Closed